V i p e r s a t C o n f i g u r a t io n
When ToS switching is enabled on a CDM-570/570L, the parameters for ToS
switching must be defined by entering P from the STDMA/SCPC Auto Switch-
ing screen (see figure 3-35). The TOS Switching Control menu shown in
figure 3-48 is displayed, allowing parameter entry for the desired ToS service to
be applied.
Figure 3-48
ToS Switching Control screen
ToS Switching Entry
After determining what ToS value to use, either application or router classifier,
select a ToS entry from the list for configuration or edit. The screen will prompt
for inputs to the list of range-checked values, as shown in the sample dialog in
figure 3-49 that displays the entries for TOS 03.
Figure 3-49
ToS Switching Entry dialog
• Enter Name for TOS ID [ ] - At the prompt, enter a user-defined text
label for circuit identification.
C h ap t e r
U s i n g t h e C o m m a n d L in e I n t e r f a c e ( C L I )
3 -
3-39