Table of Contents
Advertisement
N
ETWORK SET UP
The MFP must also be set up properly on your network to perform
scan to e-mail and scan to FTP functions. In order for other
network devices to find the MFP on the network, the following
network parameters have to be set.
1. DHCP enable:
2. IP Address: .
3. Subnet mask:.
4. Gateway IP:.
5. DNS server:.
6. SMTP server:.
7. SMTP port:25
8. POP3 server: .
9. POP3 Port:110
Explanation:
1. DHCP Enable:
Choose Yes to obtain IP/subnet/gateway addresses
automatically from DHCP server. After changing setting from
Disable to Enable, switch scanner module power OFF then ON.
2. IP Address:
The Internet Protocol (IP) address assigned to your machine
by your network administrator.
3. Subnet Mask:
The net mask address assigned by your network
administrator.
4. Gateway IP:
The gateway IP address assigned by your network
administrator.
5. SMTP Server:
The IP address of your SMTP Mail Server assigned by your
network administrator.
.
.
.
.
.
.
.
.
.
.
.
.
Configuring your machine > 27
Advertisement
Table of Contents
