Table of Contents
Advertisement
If you are using a source RGB document, simulate the output of
another printer by making the following selections in the printer
driver:
1. On the printer driver [Color] tab, select [Graphic Pro] (1)
and click [Options].
2. Select [Printer Simulation] (2).
3. Select the ICC profile that corresponds to the device used to
capture or display your source document - this could be a
monitor, scanner or digital camera (3).
4. Remember that the names "RGB Source 1", "RGB Source 2"
and so on relate to the number assigned to the profile using
Profile Assistant.
the hard disk" on page 192.
5. Select a Simulation Target Profile (4).
See "Step 2 - Down loading ICC profiles to
A guide to printing > 198
Advertisement
Table of Contents
