Table of Contents
Advertisement
2. In the Advanced Options window, under [Paper/Output],
choose [PostScript Custom Page Size] from the [Paper Size]
drop-down list.
3. In the PostScript Custom Page Size Definition window,
Choose your [paper feed direction] from the drop-down list.
The available choices are:
Short edge first
Long edge first
Short edge first
flipped
Long edge first
flipped
Notice that the size ranges available swap places when you
change the paper feed direction between a portrait and a
landscape choice.
Remember that the width of the multipurpose tray is limited to
the long edge of an A4 sheet 11.7 inches (297mm), so, if your
paper is longer than this, you will have to feed it short edge
first.
4. You can also position the page image on the paper to avoid
printing too close to the edge by choosing an [Offset].
Offset relative to [perpendicular] direction adds to your left
margin.
PS Custom Page Edit.eps
The page is portrait (tall) format and you will feed
the top of the page into the MFP.
The page is landscape (wide) format and you will
feed the top of the page into the MFP.
The page is portrait (tall) format and you will feed
the bottom of the page into the MFP.
The page is landscape (wide) format and you will
feed the bottom of the page into the MFP.
A guide to printing > 214
Advertisement
Table of Contents
