Table of Contents
Advertisement
N
ETWORK SET UP
The MFP must also be set up properly on your network to perform scan to e-mail and other
functions. In order for other network devices to find the MFP on the network, the following
network parameters have to be set.
1.
IP Address Set:
2.
IP Address:.
3.
Subnet Mask:.
4.
Gateway Address:.
5.
DNS Server:.
6.
SMTP Server:.
7.
SMTP Port:25
8.
POP3 Server:.
9.
POP3 Port:110
Explanation:
1.
IP Address Set:
Choose Auto to obtain IP/subnet/gateway addresses automatically from DHCP server.
After changing setting from Manual to Auto, the MFP will automatically reboot the
network card.
2.
IP Address:
The Internet Protocol (IP) address assigned to your machine by your network
administrator.
3.
Subnet Mask:
The net mask address assigned by your network administrator.
4.
Gateway Address:
The gateway IP address assigned by your network administrator.
5.
SMTP Server:
The IP address of your SMTP Mail Server assigned by your network administrator.
6.
SMTP Port:
The port number of your SMTP Mail Server.
7.
DNS Server:
The IP address of DNS Server assigned by your network administrator.
8.
POP3 Server:
The IP address of your POP3 server.
9.
POP3 Port:
The port number of your POP3 Server.
Enter the DNS name, or IP and port number of your POP3 server if your mail server
requires POP3 authentication, before sending e-mails from the machine.
NOTE
You must also set up the "From" details to allow e-mail sending.
.
.
.
.
.
.
.
.
.
.
.
.
Configuring your machine... > 33
Advertisement
Table of Contents
