Table of Contents
Advertisement
3.
Using the UP arrow key, navigate to Setup Fax and press
OK.
4.
Using the DOWN arrow key, navigate to DRD Mode and
press OK.
5.
Select Enable and press OK.
6.
Using the DOWN arrow key, navigate to DRD Pattern and
press OK.
7.
Select the appropriate Ring Pattern (Pattern1, Pattern2,
Pattern3, Pattern4) and press OK.
Note
When programming the DRD Ring Pattern, some trial
and error may be required in order to choose the
correct pattern for the additional number. Start by
selecting Pattern1 to see if the MFP answers the correct
phone number for the fax line. f not, select
incrementing patterns (Pattern2, 3, etc..) until the MFP
answers the correct ring.
8.
Press Return to update the selections and exit the menu.
Adding a telephone handset
If you want to add a telephone handset to your MFP, connect the
line to the Tel socket (in certain countries it may be necessary to
use a telephone plug adaptor).
note
Loop the telephone line round the ferrite once as shown.
Configuring your machine > 64
Advertisement
Table of Contents
