Table of Contents
Advertisement
Receiving a Fax
Your MFP is set to receive faxes automatically, if you wish to
change this to manual receive refer
page 63
for details.
note
If the MFP is in use, i.e. sending a fax or scanning, then any
incoming faxes will be rejected.
During other functional operations, for example copying, filing, e-
mailing, etc., then any incoming faxes will be stored and printed
out when the MFP is available.
A
DVANCED OPERATION
Accessing additional settings
note
For illustration purposes only, the advanced features shown are
as accessed from the scanner control panel, they can also be
accessed from the web page and the MFP Network Setup Tool.
To use the advanced features, press the Fax Mode button (1) on
the control panel and then the Additional Settings button (2)
to prompt the Additional settings screen.
Control menu faxadv_oda.jpg
to"Manual receive" on
Operation > 88
Advertisement
Table of Contents
