Table of Contents
Advertisement
FX emulation
ITEM
CHOICE
Character
10 CPI; 12 CPI; 17
Pitch
CPI; 20 CPI;
PROPORTIONAL
Character Set
SET 1 / SET 2
Symbol Set
IBM 437
Letter 0 Style
DISABLE
ENABLE
Zero
NORMAL
Character
SLASHED
Line Pitch
6 LPI / 8 LPI
White Page
OFF/ON
Skip
CR Function
CR / CR+LF
Line Length
80 COLUMN / 136
COLUMN
Form Length
11 inch / 11.7 inch
/ 12 inch
279.40 / 297l18 /
204.80 mm
TOF Position
0.0 inch - 1.0 inch
0 - 25.4 mm
Left Margin
0.0 inch - 1.0 inch
0 - 25.4 mm
Fit To Letter
DISABLE
ENABLE
Text Height
SAME / DIFF
Configuring your machine > 52
DESCRIPTION
Specifies character pitch in this
emulation.
Specifies a character set.
Specifies a symbol set.
Specifies the style that replaces 9BH
with letter o and 9DH with a zero
Sets the zero to be slashed or
unslashed.
Specifies the line spacing.
Selects whether blank pages are
printed or not.
Selects whether a received carriage
return character (0Dh) also causes a
line feed.
Specifies the number of characters
per line.
Specifies the length of paper.
Specifies the distance of print from
the top edge of the paper.
Specifies the distance of print from
the left hand edge of the paper.
Sets the printing mode that can fit
print data, equivalent to 11 inches
(66 lines), in the LETTER-size
printable area.
Sets the height of a character.
SAME: Regardless of CPI, same
height.
DIFF: As CPI, character heights vary.
Advertisement
Table of Contents
