Table of Contents
Advertisement
MFP
WILL NOT POLL A REMOTE MACHINE
Call the person at the remote machine and make sure that they
have loaded documents and that their machine is set to polling
transmission mode.
MFP
IS CONNECTED TO A
Be certain that the dial prefix is entered before the telephone
number for each number dialled or programmed into the MFP
(See "Connecting to a PBX" on page
MFP
ALWAYS ANSWERS BEFORE ITS POSSIBLE TO USE THE EXTERNAL
TELEPHONE
If an external telephone is connected, change the MFP's ring
response setting
F
AXES RECEIVED SOMETIMES LOOK DISTORTED
If the document received is wider or longer than the paper loaded
in the paper tray, the machine automatically reduces the width
or length of the document so that it will fit on the paper. This type
of problem could also be communication related.
PBX
BUT IT IS NOT POSSIBLE TO DIAL OUT
(See "Advanced set up" on page
Troubleshooting > 154
62.).
59.).
Advertisement
Table of Contents
