3Com Switch 4500 26-Port Configuration Manual page 380

378 A B: RADIUS S
PPENDIX
RADIUS C S
ERVER AND LIENT ETUP
3 Either re-boot the server or stop then restart the RADIUS service. To stop and
restart the Steel-Belted RADIUS service, go to Control Panel > Administrative tools
> Services. Scroll down to the Steel-Belted service, stop and restart it.
Funk RADIUS is now ready to run.
If you intend to use auto VLAN and QoS, you will need to create VLAN and QoS
profiles on the 3Com Switch 4500 and follow the instructions in
VLAN and QoS for Funk
4 Start the Funk RADIUS program, select Servers from the left hand list and select
Local Radius server. Select Connect to start listening for clients.
5 To add a user, select Users from the left hand list, enter the User name, Set
password and select Add.
RADIUS.
Configuring Auto