3Com Switch 4500 26-Port Configuration Manual page 248

246 C 14: D
HAPTER EVICE
M
ANAGEMENT
Networking Diagram
Figure 68 Networking for FTP Configuration
Switch Switch Switch
Configuration Procedure
1 Configure FTP server parameters on the PC. Define a user named as
password , read and write authority over the Switch directory on the PC.
hello
2 Configure the Switch
The Switch has been configured with a Telnet user named as
with password
hello
Use the command to log into the Switch.
telnet
<4500>
CAUTION: If the flash memory of the Switch is not enough, you need to first
delete the existing programs in the flash memory and then upload the new ones.
3 Type in the correct command in User View to establish FTP connection, then enter
the correct username and password to log into the FTP server.
<4500> ftp 2.2.2.2
Trying ...
Press CTRL+K to abort
Connected.
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(none):switch
331 Give me your password, please
Password:*****
230 Logged in successfully
[ftp]
4 Enter the authorized directory of the FTP server.
[ftp]cd switch
5 Use the command to download the switch.app from the FTP server to the
get
flash directory on the FTP server.
[ftp]get switch.app
[ftp]get boot.app
6 Use the command to release the FTP connection and return to User View.
quit
[ftp]quit
<4500>
7 Upgrade BootROM.
<4500> boot bootrom boot.app
This will update BootRom file on unit 1. Continue? [Y/N]y
Network Network
, requiring username and password authentication.
PC PC
Switch
, as 3-level user,
user
,