Table of Contents
Advertisement
Power connector cable
Description
Power connector cable (includes bracket)
Before removing the power connector cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the base enclosure (see
5.
Disconnect the battery cable (see
6.
Remove the subwoofer (see
7.
Remove the USB/Audio board (see
Remove the power connector cable:
1.
Turn the computer, with the right side toward you.
2.
Disconnect the power connector cable (1) from the system board.
3.
Remove the double-sided tape (2) from the power connector.
Base enclosure on page
Battery on page
44).
Subwoofer on page
65).
USB/Audio board on page
Spare part number
686593-001
43).
66).
Component replacement procedures
67
Advertisement
Table of Contents
