Table of Contents
Advertisement
Subwoofer
Description
Subwoofer
Before removing the USB/Audio board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the base enclosure (see
5.
Disconnect the battery cable (see
Remove the subwoofer:
1.
Disconnect the subwoofer cable (1).
2.
Remove the 2 broadhead screws (2).
3.
Remove the subwoofer (3).
Base enclosure on page
Battery on page
44).
Spare part number
686599-001
43).
Component replacement procedures
65
Advertisement
Table of Contents
