Determining The Bios Version; Downloading A Bios Update - HP ENVY Sleekbook 6 Maintenance And Service Manual

Hp envy
Table of Contents

Advertisement

Determining the BIOS version

To determine whether available BIOS updates contain later BIOS versions than those currently installed
on the computer, you need to know the version of the system BIOS currently installed.
BIOS version information (also known as ROM date and System BIOS) can be displayed by using
Setup Utility.
1.
Start Setup Utility.
2.
If the system information is not displayed, use the arrow keys to select the Main menu.
BIOS and other system information is displayed.
3.
To exit Setup Utility, use the arrow keys to select Exit > Exit Discarding Changes, and then
press enter.

Downloading a BIOS update

CAUTION:
and install a BIOS update only when the computer is connected to reliable external power using the AC
adapter. Do not download or install a BIOS update while the computer is running on battery power, or
connected to an optional power source. During the download and installation, follow these instructions:
Do not disconnect power from the computer by unplugging the power cord from the AC outlet.
Do not shut down the computer or initiate Suspend or Hibernation. Do not insert, remove, connect, or
disconnect any device, cable, or cord.
Do not shut down the computer or initiate Suspend or Hibernation. Do not insert, remove, connect, or
disconnect any device, cable, or cord.
1.
Access the page on the HP website that provides software for your computer.
2.
Follow the on-screen instructions to identify your computer and access the BIOS update you want
to download.
3.
At the download area, follow these steps:
a.
Identify the BIOS update that is later than the BIOS version currently installed on your
computer. Make a note of the date, name, or other identifier. You may need this information
to locate the update later, after it has been downloaded to your hard drive.
b.
Follow the on-screen instructions to download your selection to the hard drive.
Make a note of the path to the location on your hard drive where the BIOS update is
downloaded. You will need to access this path when you are ready to install the update.
NOTE:
installing any software updates, especially system BIOS updates.
BIOS installation procedures vary. Follow any instructions that are displayed on the screen after
the download is complete.
82
Chapter 5 Setup Utility (BIOS) and System Diagnostics
To reduce the risk of damage to the computer or an unsuccessful installation, download
If you connect your computer to a network, consult the network administrator before

Advertisement

Table of Contents
loading

This manual is also suitable for:

Envy ultrabook 6

Table of Contents