Reverse this procedure to install the battery.
Hard drive
Description
500 GB, 5400 rpm
320 GB, 7200 rpm
320 GB, 5400 rpm
128 GB mSATA solid-state drive
32 GB mSATA solid-state drive
Before removing the hard drive or SSD, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the base enclosure (see
5.
Disconnect the battery cable (see
Remove the hard drive:
1.
Disconnect the hard drive cable from the system board (1), and then remove the 4 screws (2)
securing the hard drive to the top cover.
46
Chapter 4 Removal and replacement procedures
Base enclosure on page
Battery on page
44).
Spare part number
683802-005
634862-005
645193-005
687101-001
687100-001
43).