Warning Messages - Dell Precision WorkStation 530 User Manual

S y s t e m B e e p C o d e s ( c o n t i n u e d )
Code Cause
3-3-4 Video memory failure
3-4-1 Video initialization failure
3-4-2 Video retrace failure
3-4-3 Search for video ROM failure
4-2-1 Timer tick failure
4-2-2 Shutdown failure
4-2-3 Gate A20 failure
4-2-4 Unexpected interrupt in protected mode
4-3-1 Memory failure above address 0FFFFh
4-3-3 Timer-chip channel 2 failure
4-3-4 Time-of-day clock stopped
4-4-1 Serial or parallel port failure
5-1-2-3 Memory read/write failure
5-2-2-1 Mismatch or unsupported memory modules
5-2-2-2 Mismatch memory module pair
5-2-2-3 Unable to initialize memory modules
194 So lv ing Pr o ble m s

Warning Messages

Your application programs or operating system generate warning messages
to alert you to a possible problem and ask you to take an action before you
continue. For example, before you format a diskette, a message may warn
you that you can lose all data on the diskette as a way to protect against
inadvertently erasing or writing over the data. These warning messages
usually interrupt the procedure and require you to respond by typing a
(yes) or (no).
n
Action
Run the VESA/VGA Interface tests in the
Diagnostics.
Run the VESA/VGA Interface tests in the
Diagnostics.
Run the VESA/VGA Interface tests in the
Diagnostics.
Run the VESA/VGA Interface tests in the
Diagnostics.
Contact Dell for technical assistance.
Contact Dell for technical assistance.
Contact Dell for technical assistance.
Contact Dell for technical assistance.
Run the System Memory tests in the
Contact Dell for technical assistance.
Contact Dell for technical assistance.
Run the Serial Ports and the Parallel Ports tests in the
Dell Diagnostics.
See "System Memory Problems."
See "System Memory Problems."
See "System Memory Problems."
See "System Memory Problems."
Dell
Dell
Dell
Dell
Dell Diagnostics.
y