Dell Precision WorkStation 530 User Manual page 130

130 Re m o vi n g a n d I n st a l l i n g Pa r ts
NOTICE: If you use a blunt, nonconductive object to pry the battery out of its
socket, be careful not to touch the system board with the object. Be sure that
the object is inserted between the battery and the socket before you attempt to
pry out the battery. Otherwise, you may damage the system board.
Pry the battery out of its socket with your fingers or with a blunt,
nonconductive object, such as a plastic screwdriver.
Install the new battery.
6
Orient the battery with the side labeled "+" facing up (see the
following figure). Then insert the battery into the socket, and snap it
into place.
I n s t a l l i n g t h e C o m p u t e r B a t t e r y
Close the computer
7
Stand the computer upright.
8
Reconnect the computer and devices to their electrical outlets, and
9
turn them on.
battery
cover.
battery socket