Dell Precision WorkStation 530 User Manual page 131

NOTE:
If enabled, the
message to be displayed at the next system start-up:
ALERT! Cover was previously removed.
Enter system setup and enter the current time and date. Then exit
10
system setup and save the information.
Turn off your computer and disconnect it from its electrical outlet.
11
Leave the computer off for at least 10 minutes.
Reconnect the computer to its electrical outlet and turn it on.
12
Enter system setup, and check the date and time.
13
If the time and date are still incorrect,
14
assistance.
Chassis Intrusion
option will cause the following
contact Dell for technical
Re movi ng and Inst alli ng Part s
131