NOTE: Your monitor has a built-in feature to automatically calibrate
the brightness to compensate for LED aging.
OSD warning messages
When the Dynamic Contrast feature is enabled (in these preset modes: Game or
Movie), the manual brightness adjustment is disabled.
When the monitor does not support a particular resolution mode, the following
message is displayed:
This means that the monitor cannot synchronize with the signal that it is receiving
from the computer. See
frequency ranges addressable by this monitor. Recommended mode is 2560 x 1440.
Before the DDC/CI function is disabled, the following message is displayed:
Dell 24 Monitor
To allow manual adjustment of brightness, the Dynamic Contrast will be
switched o .
Do you want to continue?
Yes
Dell P2418D
The current input timing is not supported by the monitor display.
Please change your input timing to
monitor listed timing as per the monitor specifications.
Monitor specifications
Dell 24 Monitor
The function of adjusting display setting using PC application will be
disabled.
Do you wish to disable DDC/CI function?
Yes
No
P2418D
2560x1440, 60Hz
or any other
for the Horizontal and Vertical
No
P2418D
Operating your monitor
│
45