NEC NEAX 2000IVS2 Installation Manual page 60

CHAPTER 1 GENERAL INFORMATION
Application Processor Card Mounting Conditions
(4) Mounting Conditions of Each Card
CARD NAME
PN-PW00
PN-CC01
PN-BRTA
PN-2BRTC
PN-24DTA-C
PN-30DTC-A
PN-24PRTA
PZ-M542
PZ-M557
Page 34
MOUNTING CONDITIONS
No circuit card can be mounted in the adjoining left side slot
because one card occupies two physical slots width.
Mount the PN-CC01 card in the slot that adjoins the PN-AP01
card. Connect both cards using cable (48-TW-0.3 CONN CA).
Mount at least one card in PIM0 to receive source clock signals.
Mount the PZ-M542/PZ-M557 card into any LTC connector of
PIM BWB.
Max. two cards can be mounted per PIM as follows:
LTC0 and LTC2
LTC0 and LTC3
LTC1 and LTC3
2
NEAX2000 IVS Installation Procedure Manual
ND-70928 (E), Issue 1.0