MOUNTING CIRCUIT CARDS
(1) Before mounting the circuit cards, confirm the following items.
• Wrist Strap is connected to Frame Ground.
• Switch settings of circuit cards are already completed. See
• The "SW1" switches of all PZ-PW121 cards are turned off.
(2) Mount circuit cards into their mounting positions according to the "Bay Face Layout" and
"Port Assignment Table" given in the Office Data Programming Manual. See CHAPTER 1
"MOUNTING CONDITIONS OF CIRCUIT CARD" on
This figure shows the mounting method of circuit cards.
CARD CONTACT SIDE
2
NEAX2000 IVS
Installation Procedure Manual
ND-70928 (E), Issue 1.0
Figure 2-105 Mounting of Circuit Cards
WRIST STRAP
CARD LABEL
CHAPTER 2 INSTALLATION
CHAPTER
Page
29.
TO FRAME GROUND CONNECTION
(Page
39)
CARD FRONT SIDE
Mounting Circuit Cards
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required
3.
Page 199