Equipment Name And Function; Module/Installation Hardware; Table 1-1 Module Name And Function - NEC NEAX 2000IVS2 Installation Manual

EQUIPMENT NAME AND FUNCTION

This section explains the names and functions of the equipment (modules, installation hardware,
circuit cards) used in the system.

Module/Installation Hardware

This table shows the names and functions of the modules.
EQUIPMENT FUNCTIONAL
NAME
SN1480 PIM
PIMAF
SN1545 BASE/TOP
BASERE ASSEM
TOP COVER
ASSEM
SN1526 BATTM
BATTMF
2
NEAX2000 IVS Installation Procedure Manual
ND-70928 (E), Issue 1.0

Table 1-1 Module Name and Function

NAME
Port Interface Module (PIM)
Max. 64 physical ports per PIM.
Houses two batteries for protection from short power
interruption (for 30 minutes).
At maximum configuration, the system consists of eight PIMs
and provides a total of 512 physical ports (64 ports x 8).
Base/Top Cover Assembly
One base and top cover assembly is required for each stack.
Battery Module for housing PIM or CS (ZT) backup batteries
Houses two pairs of batteries for protection from long power
interruption (for 3 hours).
CHAPTER 1 GENERAL INFORMATION
Equipment Name and Function
FUNCTION
Page 13