Pn-M03 M03; Pn-M10 M10 - NEC NEAX 2000IVS2 Installation Manual

CHAPTER 1 GENERAL INFORMATION
Line/Trunk Card
Table 1-5 Line/Trunk Card Name and Function (Continued)
EQUIPMENT FUNCTIONAL
NAME
PN-4LCL LC
[For China]
PN-4LCV LC
[For Brazil]
PN-4LCW LC
[For Brazil]
PN-8LCAA LC
PN-2LDTA LDT
[For
Australia/Oth-
ers]
PN-M03 M03
PN-M10 M10
Page 24
NAME
4-line Analog Line Circuit Card for Single Line Telephones
Loop resistance : Max. 600 ohms (including telephone set)
Provides Message Waiting Lamp control function for each
circuit, and reverse function for only No. 3 circuit.
Equipped with +80V DC-DC on-board power supply.
4-Line Analog Line Circuit Card for Single Line Telephones
Loop resistance : Max. 600 ohms (including telephone set)
4-line Analog Line Circuit Card for Single Line Telephones
Loop resistance : Max. 600 ohms (including telephone set)
Provides Message Waiting Lamp control function for each
circuit, and reverse function for only No. 3 circuit.
Equipped with +80V DC-DC on-board power supply.
8-line Analog Line Circuit Card for Single Line Telephones
Loop resistance : Max. 600 ohms (including telephone set)
Provides Message Waiting Lamp control, momentary open
functions for each circuit.
2-line Loop Dial Trunk Card
Line resistance: Max. 2500 ohms (including internal resis-
tance of the distant office equipment)
Equipped with –48V DC-DC on-board power supply.
V.35 Data Terminal Equipment Interface Card
Used together with the PN-2DPCB card to provide the V.35
interface.
Optical Interface Card
Provides internal optical modem to T1/E1 network or Remote
PIM.
Line length : 10 km or less
Line coding : CMI
FUNCTION
2
NEAX2000 IVS Installation Procedure Manual
ND-70928 (E), Issue 1.0