STEP 3: Secure the PZ-M542/PZ-M557 card to the PIM CARD STOPPER with one screw.
NOTE 1: Screw is attached to the PZ-M542/PZ-M557 card.
NOTE 2: Before securing the PZ-M542/PZ-M557 card to the PIM CARD STOPPER, all cards
should be mounted on the card slots and the PIM CARD STOPPER should be secured
with screws. See "MOUNTING CIRCUIT CARDS" on
Figure 2-58 Mounting of PZ-M542/PZ-M557 Card (2 of 2)
SCREW
2
NEAX2000 IVS
Installation Procedure Manual
ND-70928 (E), Issue 1.0
PZ-M542/PZ-M557
CHAPTER 2 INSTALLATION
Digital Trunk Interface (DTI)
Page
199.
CARD STOPPER
Page 143