CHAPTER 3 LAMP INDICATIONS AND SWITCH SETTINGS
PN-CP14 (MP)
SWITCH NAME
JP0 (Jumper pin)
Front
JP1 (Jumper pin)
Front
The figure in the SWITCH NAME column and the position in
column indicate the standard setting of the switch. When the switch is not set as shown by the
figure and
, the setting of the switch varies with the system concerned.
Page 214
SWITCH
SETTING
NUMBER
POSITION
UP
DOWN
UP
DOWN
FUNCTION
Not used
(Memory backup OFF)
For normal operation
(Memory backup ON)
For using internal tone source
For using external tone source
in the SETTING POSITION
NEAX2000 IVS
CHECK
2
Installation Procedure Manual
ND-70928 (E), Issue 1.0