Maintaining The Printer; Cleaning The Printer - Intermec PX4i User Manual

Chapter 4 — Troubleshooting and Maintaining the Printer

Maintaining the Printer

Cleaning the Printer

126
2 Modify one or more LTS settings.
Setting
LTS Adjust
LTS Test
LTS Value
To keep your printer working properly, you should perform regular
maintenance.
To properly maintain your printer, you should regularly clean it. You
can clean the:
• exterior of the printer.
media guides.
•
• printhead.
To avoid possible personal injury or damage to the printer, never
insert any pointed or sharp objects into the printer.
How to Modify
Press E. The printer feeds a label.
1
Remove the label and press E again. The printer
2
displays the sensitivity value that is automatically
selected by the firmware and the range in which the
LTS will work.
Press E again to proceed to the LTS Test menu.
3
Press E. The printer feeds a label.
1
2
Remove the label. The printer automatically feeds
another label.
3
Repeat Steps 1 and 2 until you are sure the LTS is
working properly.
Press E to stop the test and exit.
4
Press E.
1
2
Enter a new LTS value within the range indicated in
the LTS Adjust menu (0 to 10).
PX4i and PX6i High Performance Printer User's Manual