Configuring Alerts - Intermec PX4i User Manual

PX4i and PX6i High Performance Printer User's Manual
Understanding the Web Shell Settings (continued)
Setting Description
Default Setup Returns the printer to factory default settings. Passwords,
alerts, and the selected application are not changed.
Reboot Reboots the printer.
Print Test Label Prints the predefined test label you choose.
Command Sets the command language to Fingerprint, Direct
Language Protocol, IPL, ZSim, or DSim. You need to reboot the
printer for the change to take effect.
Fingerprint Defines the application to run as the default on startup.
Application You need to reboot the printer for the change to take
effect.
Standard I/O Defines the port the printer listens to. You need to reboot
the printer for the change to take effect.

Configuring Alerts

Use the Alerts page to view and change the printer alert settings.
To configure alerts
1 Click Printer > Alerts.
2 Change the alert settings:
• From the Setting list, choose Enabled or Disabled.
In the text field, specify a Delay repeat.
•
• In the Delay Unit list, select seconds or occurrences.
• In the Message text field, enter a message.
Chapter 3 — Configuring the Printer
83