Using The Magnetic Stripe Reader; Maintaining The Printer - Intermec PB 3 User Manual

Mobile printer

Hide thumbs Also See for PB 3:

Table of Contents

Using the Magnetic Stripe Reader

If your PB3 includes the optional magnetic stripe reader, follow the

next procedure to read cards.

Note: You need an application running on the host computer to read

data from the card. For more information, see the XSim Programmer's

Reference Manual (P/N 937-014-xxx).

PB3 Magnetic Stripe Reader Slot

To use the magnetic stripe reader

1 Position the card so the magnetic stripe faces the paper door.

2 Quickly swipe the card through the reader in either direction. The

Data and Status LED indicates card reading status as described in

"Understanding the LEDs" on page 3.

Cleaning cards for the magnetic stripe reader are available from

Intermec. For information, contact your local Intermec distributor.

To clean the exterior of the printer, use a soft cloth and mild cleaner.

Do not use abrasive cleaner, chemicals, or scouring pads, as these will

damage the finish.

PB3 Mobile Printer User's Guide

Table of Contents

Pb2