Chapter 3 — Configuring the Printer
96
Configuring Wireless LAN Settings
Use the Wireless LAN page to view and change 802.11 settings.
Note: The Wireless LAN settings are only available if your printer has
the wireless 802.11 radio interface option installed and is running
Fingerprint 8.77.0 or later, or IPL v2.77.0 or later.
To configure wireless LAN settings
1 Click Network Admin > Wireless LAN.
2 View or update your settings.
3 Click Submit 802.11 settings.
Use the following table to understand the Wireless LAN settings.
Understanding the Wireless LAN Settings
Setting
SSID
Mode
WEP
WEP Keys
Active WEP key
Description
The network name of the printer.
Set the operating mode of the device to Ad-Hoc or
Infrastructure.
Set Wired Equivalent Privacy (WEP) to on or off.
You can enter values for up to 4 WEP keys.
Chooses the active WEP key.
PX4i and PX6i High Performance Printer User's Manual