Intermec PX4i User Manual page 106

Chapter 3 — Configuring the Printer
92
Understanding the TCP/IP Settings (continued)
Setting
IPV6 Settings
Name Resolution
Printer Service
Description
Configuration method: The method by which an IP
address is assigned to the printer. You can choose
between:
•
AUTO: The IP address is obtained using stateless
auto-configuration. This is the default
configuration method.
•
AUTO+DHCP: The IP address is obtained using
stateless auto-configuration, but DNS options are
obtained using DHCP.
•
DHCP: The IP address and DNS options are
obtained using DHCP.
•
MANUAL: The IP address is set to a static address
that you enter in the Static Address field.
Current addresses: A list of all the currently
configured IP addresses for the Ethernet interface. The
address starting with FE80:: is the link-local address
and is available regardless of the configuration method
you choose.
Static address: This address applies if you selected
manual as the configuration method. The IP address
is specified as an address and a prefix separated by a
slash. You can use "::" to represent a large number of
consecutive zeros. You should typically set the prefix
to 64.
Example:
2001:DB8:0:F101::2/64
DNS Server: The IP address of the name server.
DNSv6 Server: The IP address of the name server for
IPv6.
WINS Server (Primary and Secondary): The IP
addresses of the primary and secondary WINS servers.
If you chose DHCP or BOOTP for the configuration
method, you may see the currently assigned WINS IP
addresses depending on the configuration of your
DHCP server.
NET1 TCP Port Number: The port number for raw
TCP. The default is 9100.
NET1 Queuing: Determines whether queuing for the
TCP port is turned on, off, or enabled for multiple
network connections (Multi).
PX4i and PX6i High Performance Printer User's Manual