Using Effects; Selecting An Effect; Apply Reverb - Boss BR-80 Owner's Manual

Using Effects

eBand mode provides two effects
processors (insert effect and reverb).

Selecting an Effect

Here's how to choose the effect that's
applied to the input from the GUITAR/MIC
IN jack.
1.
Press the [COSM] button .
The effect patch select screen will appear.
The effect will turn on/off each time you
press the [COSM] button.
2.
Use the cursor [
move the cursor to "CATEGORY," and
use the dial to select the desired
category .
3.
Use the cursor [
move the cursor to "PATCH," and use
the dial to select the desired patch .
* Song patches cannot be used in eBand
mode.
4.
Press the [EXIT] button a number of
times to return to the basic screen .
MEMO
For details on the effects, refer to
"Editing the Insert Effect Settings (EDIT)"
(p. 110).
] [ ] buttons to
] [ ] buttons to

Apply Reverb

Here's how to make settings for the
reverberation (reverb) that's applied to the
input from the GUITAR/MIC IN jack.
1.
Press the [COSM] button .
The effect patch select screen will appear.
2.
Press the [ENTER] button .
The Menu screen will appear.
3.
Use the cursor [
move the cursor to "REVERB," and
press the [ENTER] button .
The screen for detailed reverb settings will
appear.
4.
Use the cursor [
select a parameter, and use the dial
to edit the setting .
Parameter Value
TYPE ROOM, HALL, PLATE
TIME 0.1 s–10.0 s
E .LEVEL 0–100
5.
Press the [EXIT] button a number of
times to return to the basic screen .
] [ ] buttons to
] [ ] buttons to
97