Press The [Menu] Button; [Enter] Button - Boss BR-80 Owner's Manual

1.
Use the cursor buttons and the dial to
select the copy-source (SOURCE) and
copy-destination (DEST) track and
V-track .
2.
Press the [ENTER] button .
The time setting screen will appear.
3.
Use the cursor buttons and the dial
to specify the time location and the
number of times to copy the data .
The parameters displayed will depend on
the type you select.
Parameter Explanation
TYPE
The START and END will be the
time locations you specified for
AB (TIME) AB Repeat p. 60).
TO is specified as a time
location.
The START and END will be the
time locations you specified for
AB (MEASURE)
AB Repeat p. 60).
TO is specified as a measure.
Specify START, END, and TO as
TIME
time locations.
Specify START, END, and TO as
MEASURE
measures.
The entire track will be copied.
ALL (TIME) TO is specified as a time
location.
The entire track will be copied.
ALL(MEASURE)
TO is specified as a measure.
Track Editing (TRACK EDIT)
Parameter Explanation
START
Time or
Specify the start of the copy
measure
source.
END
Time or
Specify the end of the copy
measure
source.
TO
Time or Specify the start of the copy
measure destination.
REPEAT
Specify the number of
1–99
repetitions.
4.
To copy the data, press the [ENTER]
button .
A message will ask "Are you sure?"
If you decide to cancel the procedure, press
the [EXIT] button.
5.
Press the [ENTER] button .
The copy will be carried out.
* The display will indicate "Keep power
on!" while the data is being updated.
Do not turn off the power while this
message is shown.
75