Using The Metronome; Changing The Song And Effects Simultaneously (Patch Sync) - Boss BR-80 Owner's Manual

Using the Metronome

In eBand mode you can sound a
metronome while the song plays back.
1.
Press the [RHYTHM] button .
The METRONOME screen will appear.
2.
Press the [ENTER] button to switch
METRONOME on/off .
3.
Use the cursor [
select a parameter, and use the dial
to edit the setting .
Parameter Value
BEAT Specifies the time signature.
TEMPO
Specifies the tempo.
LEVEL Specifies the volume.
ON: The metronome will
be recorded with the
performance.
REC
OFF: You'll hear the
metronome, but it will not be
recorded.
4.
Press the [EXIT] button a number of
times to return to the basic screen .
] [ ] buttons to
Changing the Song and
Effects Simultaneously
(PATCH SYNC)
Here's how to set the BR-80 so the
effect patch stored in a song is loaded
automatically when you switch songs.
1.
Press the [MENU] button .
The Menu screen will appear.
2.
Use the cursor [
move the cursor to "FUNCTION," and
press the [ENTER] button .
3.
Use the cursor [
move the cursor to "SYSTEM," and
press the [ENTER] button .
4.
Set the "PATCH SYNC" setting to "ON . "
At the factory settings, this is set to "ON. "
If set to "OFF, " the "SONG INFO" patch
sync setting (p. 98) will be ignored, and the
currently selected effect patch will be used.
Even if you switch songs, the effect patch
will not change.
Other Functions
] [ ] buttons to
] [ ] buttons to
101