Recording - Boss BR-80 Owner's Manual

Recording/Playback
5.
Press the [ENTER] button .
The song will be selected, and you'll return
to the Level Meter screen.
* The display will indicate "Keep power
on!" while the data is being updated.
Never turn off the power while this
message is shown.

Recording

Rewind While stopped: Recording standby
During playback: Recording
Fast-forward
Stop
1.
Connect the device you want to
record (p . 40) .
The device you connect will be selected
automatically.
If you don't connect anything, the built-in
microphones will be selected.
MEMO
• If you connect a device to the GUITAR/
MIC IN jack, the GUITAR/MIC IN jack
will take priority, and the built-in
microphones will turn off.
• If you connect devices to the LINE IN
jack or the USB connector, they will be
mixed with the input from the GUITAR/
MIC IN jack or the built-in microphones.
• To record only the sound arriving at the
LINE IN jack and USB connector, turn the
[REC LEVEL] dial all the way down. Use
the controls of the connected device to
adjust the recording level.
58
Play
2.
Use the track buttons to select the
recording track (p . 59) .
3.
Press the [ ] (REC) button to enter
recording-standby mode .
The [ ] (REC) button will blink.
4.
Use the [REC LEVEL] dial to adjust the
recording level .
Adjust the loudness of the sound you'll be
recording.
If the peak indicator lights, adjust "INPUT
SENS" (p. 114).
5.
Start recording .
In recording-standby mode ([
button blinking), press the [
button.
The [ ] (REC) button will light, and
recording will begin.
NOTE
• The recording level will change if you
operate the [REC LEVEL] dial while in
during recording.
Take care so as not to inadvertently
move the [REC LEVEL] dial.
• You can't turn the power off during
recording. You must first stop recording,
and then turn the power off.
6.
Press the [ ] (STOP) button to stop
recording .
] (REC)
] (PLAY)