1.
Use the cursor [
the dial to select the erase-source
track/V-track .
2.
Press the [ENTER] button .
The time setting screen will appear.
3.
Use the cursor buttons and the dial to
specify the time location .
4.
To erase the data, press the [ENTER]
button .
A message will ask "Are you sure?"
If you decide to cancel the procedure, press
the [EXIT] button.
5.
Press the [ENTER] button .
The erase will be carried out.
* The display will indicate "Keep power
on!" while the data is being updated.
Do not turn off the power while this
message is shown.
] [
] buttons and
Track Editing (TRACK EDIT)
Exchanging Data
(TRACK EXCHANGE)
This operation exchanges data between
two tracks.
Example:
Exchanging the entire contents of tracks 1
and 2
Track 1: Guitar
Track 2: Vocal
Track 1: Vocal
Track 2: Guitar
1.
Use the cursor [
and the dial to select the tracks and
V-tracks that you want to exchange .
2.
To exchange the data, press the
[ENTER] button .
A message will ask "Are you sure?"
If you decide to cancel the procedure, press
the [EXIT] button.
] [
] buttons
77