Detailed Effect Settings; Editing The Insert Effect Settings (Edit) - Boss BR-80 Owner's Manual

Detailed Effect Settings

Editing the Insert Effect
Settings (EDIT)
To create a new effect sound, choose an
existing patch that's close to what you have
in mind, and then edit it. When saving the
edited patch, save it as a user patch or song
patch.
1.
Press the [COSM] button .
The effect patch select screen will appear.
2.
Select an effect patch (p . 68) .
3.
Press the [ENTER] button .
4.
Use the cursor [
move the cursor to "EDIT," and press
the [ENTER] button .
The EDIT screen will appear.
5.
Use the cursor [
move the cursor to each effect, and
use the dial to specify the on/off
status of each effect .
Indication Explanation
Effect on (selected)
Effect on
Effect off (selected)
Effect off
110
] [ ] buttons to
] [ ] buttons to
6.
Use the cursor [
move the cursor to the effect whose
parameters you want to edit, and
press the [ENTER] button .
The parameter edit screen for that effect
will appear.
For details on the effect parameters, refer
to "BR-80_Data_List_e.pdf" on the included
SD card.
For details on where "BR-80_Data_List_e.
pdf" is located, refer to "ReadmeEN.txt" on
the included SD card.
7.
Use the cursor [
select a parameter, and use the dial
to edit its value .
If you want to edit a different effect, press
the [EXIT] button to return to the previous
screen, and repeat steps 5–6.
8.
Press the [EXIT] button a number of
times to return to the basic screen .
NOTE
If you switch to another effect patch
before saving, the changes you made
will be lost.
] [ ] buttons to
] [ ] buttons to