Recording - Boss BR-80 Owner's Manual

Recording/Playback
MEMO
After specifying the time in the
procedure above, a "+" may appear
to show that there is a discrepancy
between the actual current position and
the position displayed.
If you specify the locations using
measures, specify the locations at each
screen using the dial to eliminate the
discrepancy.
5.
Use the cursor [
move the cursor to "IN," and turn the
dial to specify the punch-in location .
You can move to the current location by
pressing the [ENTER] button.
6.
Use the cursor [
move the cursor to "OUT," and turn
the dial to specify the punch-out
location .
MEMO
If you place the cursor at IN or OUT,
and then press the [ENTER] button, the
current time will be specified as the
time.
7.
Press the [EXIT] button a number of
times to return to the level meter
screen .
The display will indicate "A. PUNCH, "
indicating that the punch-in/out locations
have been specified.
62
] [ ] buttons to
] [ ] buttons to

Recording

In this example, we'll explain how to
specify the auto punch-in/out locations
beforehand, and then re-record a specified
region of the previously recorded track 1.
1.
Play back the song, and use the [REC
LEVEL] knob to adjust the volume of
the input .
Compare the volume of the input to the
volume of the track that you want to re-
record, and adjust the [REC LEVEL] knob so
that there is no difference in volume.
2.
Move to a location a little earlier than
the region that you want to re-record .
3.
Select the track 1, and press the
[ ] (REC) button to put the BR-80 in
recording-standby mode .
4.
Press the [ ] (PLAY) button .
Punch-in will occur automatically at the
beginning of the specified region. Re-
record your performance. The [
button will light during recording.
When you arrive at the punch-out location,
the BR-80 will automatically return to
playback mode, and the [
will go out.
] (REC)
] (REC) button