Making Overall Settings
Adjusting the Input
Sensitivity (INPUT)
Here's how to adjust the input sensitivity
of the GUITAR/MIC IN jack/Built-in
microphones.
* This setting is not available in LIVE REC
mode.
1.
Press the [MENU] button .
2.
Use the cursor [
move the cursor to "INPUT," and press
the [ENTER] button .
3.
Use the dial to adjust the value .
4.
Press the [EXIT] button a number of
times to return to the relevant screen
for the mode you're in .
System Settings
(SYSTEM)
1.
Press the [MENU] button .
2.
Use the cursor [
move the cursor to "FUNCTION," and
press the [ENTER] button .
3.
Use the cursor [
move the cursor to "SYSTEM," and
press the [ENTER] button .
114
] [
] buttons to
] [
] buttons to
] [
] buttons to
4.
Use the cursor [
select a parameter, and use the dial
to edit the value .
Parameter
Explanation
LCD
Adjusts the contrast of the LCD
CONTRAST
screen.
LCD
Adjusts the brightness of the
BACKLIGHT
LCD screen backlight.
Specifies the time after which
POWER SAVE
the backlight will be dimmed.
Specifies the time after which
AUTO POWER
the power will be automati-
OFF
cally turned off (p. 42).
If you turn this ON, the
indication for the current time
will be switched so it indicates
REMAIN INFO
the remaining available
(MTR mode
recording time.
only)
If you turn this OFF, the
indication will return to the
current time.
Here you can turn the PATCH
PATCH SYNC
SYNC function on/off (p. 98).
Specifies the type of battery
BATTERY
that is installed.
5.
Press the [EXIT] button a number of
times to return to the relevant screen
for the mode you're in .
] [
] buttons to