Mastering
Saving the Mastering
Effect Settings
Here's how to assign a name (patch name)
to the effect you've created, and save it as a
new effect.
1.
In the MASTERING screen, press the
[ENTER] button .
The Menu screen will appear.
2.
Use the cursor [
move the cursor to "WRITE/NAME,"
and press the [ENTER] button .
The Name screen will appear.
3.
Use the cursor [
the dial to enter a patch name .
4.
When you've finished entering
the patch name, press the [ENTER]
button .
The WRITE screen will appear.
84
] [
] buttons to
] [
] buttons and
5.
Use cursor [
] [
the dial to select the desired write-
destination mastering effect .
6.
Once you've selected the destination
at which to write the mastering
effect, press the [ENTER] button .
A confirmation message will ask "Are you
sure?"
7.
Press the [ENTER] button to save the
settings, or press the [EXIT] button if
you decide to cancel .
When the settings have been saved, you'll
be returned to the MASTERING screen.
] buttons and