Making Detailed Eq Settings; Adjusting The Reverb (Reverb Send); Making Detailed Reverb Settings - Boss BR-80 Owner's Manual

Making Detailed EQ
Settings
1.
In the TRACK EQ screen, press the
[ENTER] button .
A screen for detailed track EQ editing will
appear.
2.
Use the cursor [
select a track .
3.
Use the cursor [
select a parameter, and use the dial
to edit the value .
Parameter Value
ON/OFF OFF, ON
HIGH CUT
700Hz–11kHz, FLAT
HIGH GAIN -20dB–+20dB
MID FREQ 20Hz–10kHz
MID Q
0.5–16
MID GAIN -20dB–+20dB
LOW GAIN -20dB–+20dB
LOW CUT
FLAT, 55Hz–800Hz
LEVEL -20dB–+20dB
4.
Press the [EXIT] button to return to
the TRACK EQ screen .
] [ ] buttons to
] [ ] buttons to
Track Settings (the Mixer Screen)
Adjusting the Reverb
(REVERB SEND)
Here you can adjust the depth of
reverberation (reverb) for each track.
1.
Use the cursor [
select a track .
2.
Use the dial to adjust the amount of
signal that's sent to the reverb .
MEMO
You can press the cursor [
switch to the TRACK EQ screen.
You can press the cursor [
switch to the V-TRACK screen.
Making Detailed Reverb
Settings
1.
In the REVERB SEND screen, press the
[ENTER] button .
A screen for detailed reverb editing will
appear.
] [ ] buttons to
] button to
] button to
65