Track Editing (TRACK EDIT)
Moving Track Data
(TRACK MOVE)
This operation moves the data of the
specified track.
If recorded data exists at the destination of
the move, it will be overwritten by the data
that was moved.
Example 1: Moving within the same track
Tack 1
(A)
Start time
(B)
End time
Example 2: Moving to a different track
Track 1
Track 2
(A)
Start time
(B)
End time
1.
Use the cursor [
the dial to select the move-source
track/V-track (SOURCE) and move-
destination track/ V-track (DEST) .
76
TO
Time
TO
Time
] [
] buttons and
2.
Press the [ENTER] button .
The time setting screen will appear.
3.
Use the cursor buttons and the dial to
specify the time location .
4.
To carry out the move, press the
[ENTER] button .
A message will ask "Are you sure?"
If you decide to cancel the procedure, press
the [EXIT] button.
5.
Press the [ENTER] button .
The move will be carried out.
* The display will indicate "Keep power
on!" while the data is being updated.
Do not turn off the power while this
message is shown.
Erasing Track Data
(TRACK ERASE)
This operation erases data from the
specified region.
Track 1
Track 1
(A)
Start time
(B)
Time
End time