User Management - Honeywell rapid eye System Administrator Manual

LocalView's local "Administrator" account
The Administrator account in LocalView grants an onsite operator access to one Rapid Eye unit in
your organization. Users of this account can also use every function in LocalView software.
Many users
If many users use the system, Honeywell recommends:
Your Multi SA limit the use of the Administrator account and add a password to the account
(see Administrator
That the password to the "Administrator" user account, and of any others based on that
account, should be kept secure and changed regularly.
Using Admin software
To log on to Admin software, other user accounts can be used if they have the Rights and site
access are based on Administrator. Creating such accounts should be handled with care in high
security environments.
Configuring LocalView
To configure LocalView software, a user account needs the Modify Configuration right.

User Management

Flexibility
Switching a unit from Local User Management (the default) to Central User Management is an
option.
Setting user management
Changing User management is performed unit-by-unit.
Only Admin software can be used to set a unit to Central User Management.
Only LocalView can be used to re-enable a unit to use Local User Management.
Creating Multi-Media accounts for running View software
Whether user management is central or local, Admin can always be used to add accounts for
connecting to a unit from a PC running View.
Older units
User management is not available on older Rapid Eye models such as Multi units.
Document 800-02325 Rev A
07/08
Password, on p. 183).
System Administrator Guide
157