Top Cover - HP EliteBook 8560w Maintenance And Service Manual

Top cover

The top covers include TouchPad button and bracket.
Description
For use on computer models with a fingerprint reader
For use on computer models without a fingerprint reader
Before removing the top cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service access cover (see
6. Remove the following components:
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
Remove the top cover:
1. Turn the computer right-side up, with the front toward you.
2. Release the following ZIF connectors (1) and disconnect the corresponding cables (2) from the
system board:
●
Power button ZIF connector
●
TouchPad ZIF cable
●
TouchPad buttons ZIF cable
●
Fingerprint reader ZIF cable
●
Application buttons ZIF cable
68 Chapter 4 Removal and replacement procedures
Battery on page 45).
Service access cover on page
Hard drive on page 57)
Optical drive on page
Keyboard on page 64)
62)
Spare part number
652652-001
652653-001
47).