Removal And Replacement Procedures For Authorized Service Provider Parts; Component Replacement Procedures; Top Cover - HP Z VR Backpack G1 Maintenance And Service Manual

5 Removal and replacement procedures for
Authorized Service Provider parts
This chapter provides removal and replacement procedures for Authorized Service Provider only parts.
CAUTION:
Accessing these parts can damage the computer or void the warranty.
CAUTION:
perform the removal and replacement procedures described here. Accessing the internal part could damage the
computer or void the warranty.

Component replacement procedures

Top Cover

Description
Top cover
CAUTION:
caution while removing the top cover, fans and antenna, until the battery is removed.
Follow these steps to remove the top cover:
1. Shut down the computer. If you are unsure whether the computer is off or in hibernation, turn the
computer on, then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the six rubber screw covers (1).
14 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Components described in this chapter should only be accessed by an authorized service provider.
This computer does not have user-replaceable parts. Only HP authorized service providers should
The battery is connected to an onboard power connector on the system board. Please exercise
Spare part number
L02932-001