System Board - HP EliteBook 8560w Maintenance And Service Manual

System board

NOTE: All system board spare part kits include replacement thermal material and VGA support
bracket.
NOTE: Models that support quad-core processors have four memory slots. Models that support
dual-core processors have two memory slots.
Description
For use with dual-core processors
For use with quad-core processors
For use with dual-core processors in China and Russia
For use with quad-core processors in China and Russia
Before removing the system board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service access cover (see
6. Remove the following components:
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. Top cover (see
e. Video card fan/heat sink assembly (see
f. Processor heat sink (see
When replacing the system board, be sure that the following components are removed from the
defective system board and installed on the replacement system board:
●
SIM (see
●
Memory modules (see
●
WLAN module (see
●
WWAN module (see
●
Processor (see
●
Graphics card (see
Battery on page
Hard drive on page
Optical drive on page
Keyboard on page
Top cover on page
Processor heat sink on page
SIM on page 46)
Expansion memory modules on page
WLAN module on page
WWAN module on page
Processor on page
Graphics card on page
45).
Service access cover on page
57)
62)
64)
68)
Video card fan/heat sink assembly on page
51)
53)
87)
85)
Component replacement procedures 103
Spare part number
652637-001
652638-001
656213-001
656214-001
47).
83)
48)
81)