Select
Built-In Device Options
Port Options
128 Chapter 5 Computer Setup
To do this
●
Enable/disable the wireless button state (enabled by
default).
●
Enable/disable embedded WLAN device radio (select
models only; enabled by default).
●
Enable/disable the embedded Bluetooth device radio
(enabled by default).
●
Enable/disable the Network Interface Controller (NIC)
(enabled by default).
●
Enable/disable LAN/WLAN switching (disabled by
default).
●
Set the wake on LAN state. Options include the
following:
◦
Disabled
◦
Boot to Network
◦
Follow Boot Order
●
Enable/disable the Ambient Light Sensor.
●
Enable/disable the Notebook Upgrade Bay device
(enabled by default).
●
Enable/disable the fingerprint device (enabled by
default).
●
Enable/disable the integrated camera (enabled by
default).
●
Enable/disable the Power Monitor Circuit (enabled by
default).
●
Enable/disable the audio device (enabled by default).
●
Enable/disable a modem device (enabled by default).
●
Enable/disable the microphone (enabled by default).
●
Enable/disable the internal speakers (enabled by
default).
NOTE:
All port options are enabled by default.
●
Enable/disable the serial port.
●
Enable/disable the parallel port.
●
Enable/disable the flash media reader.
●
Enable/disable the USB port.
CAUTION:
Disabling the USB port also disables
MultiBay devices and ExpressCard devices on the
advanced port replicator.
●
Enable/disable the 1394 port.
●
Enable/disable the ExpressCard slot.
●
Enable/disable the smart card slot.
●
Enable/disable the eSATA port.