Bluetooth Module - HP EliteBook 8560w Maintenance And Service Manual

Bluetooth module

NOTE: The Bluetooth module spare part kit does not include a Bluetooth module cable. The
Bluetooth module cable is included in the Cable Kit, spare part number 652662-001. For information
about Cable Kit contents, see
Description
Bluetooth module
Before removing the Bluetooth module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service access cover (see
Remove the Bluetooth module:
1. Position the computer upside-down, with the front toward you.
2. Remove the tape from the top of the Bluetooth module (1).
3. Remove the tape from the Bluetooth cable (2).
4. Disconnect the Bluetooth cable (3) from the system board.
5. Disconnect the Bluetooth module cable (4) from the Bluetooth module.
6. Remove the Bluetooth module.
Cable Kit on page 29.
Battery on page 45).
Service access cover on page
Spare part number
537921-001
47).
Component replacement procedures 55