Speakers - HP EliteBook 8560w Maintenance And Service Manual

Speakers

Description
Speaker
Before removing the speakers, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service access cover (see
6. Remove the following components:
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. Top cover (see
e. Video card fan/heat sink assembly (see
f. Processor heat sink (see
g. Processor (see
h. Modem module (see
i. Audio/USB 3.0 board (see
Remove the speakers:
1. Position the computer right-side up, with the front toward you.
2. Remove the display latch:
a. Remove the spring (1) from the display latch lock.
b. Remove the three Phillips M2.0×2.0 screws (2) from the display latch lock.
c. Push down the button (3) in the front right corner of the display latch lock.
Battery on page 45).
Service access cover on page
Hard drive on page 57)
Optical drive on page
Keyboard on page 64)
Top cover on page 68)
Processor heat sink on page
Processor on page 87)
Modem module on page
Audio/USB 3.0 board on page
62)
Video card fan/heat sink assembly on page
83)
89)
91)
Component replacement procedures
Spare part number
652669-001
47).
81)
93