Primary Memory Module - HP EliteBook 8560w Maintenance And Service Manual

Primary memory module

NOTE: Primary memory is installed under the keyboard.
A computer having a system board with spare part number 652637-001 or 656213-001 has two
memory slots (primary memory slots). When adding or replacing memory modules, slot 1 must be
populated before slot 2 is populated.
A computer having a system board with spare part number 652638-001 or 656214-001 has four
memory slots (expansion memory slots) (on the bottom of the computer) and the primary memory
slots (under the keyboard). Slot 2 cannot be populated if slot 1 is not populated.
Description
2 GB (PC3-10600, 1333 MHz, DDR3)
4 GB (PC3-10600, 1333 MHz, DDR3)
8 GB (PC3-10600, 1333 MHz, DDR3)
Before removing a memory module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service access cover (see
6. Remove the following components:
a. Hard drive (see
b. Keyboard (see
Remove the memory module:
1. Spread the retaining tabs (1) on each side of the memory module slot to release the memory
module. (The edge of the module opposite the slot rises away from the computer.)
66 Chapter 4 Removal and replacement procedures
Battery on page 45).
Service access cover on page
Hard drive on page 57)
Keyboard on page 64)
Spare part number
621565-001
621569-001
634091-001
47).