Service access cover
Description
Service access cover
Before removing the service access cover, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Remove the service access cover:
1.
Position the computer upside down, with the front of the computer toward you.
2.
Slide the service access cover release latch to the left (1).
3.
Slide the service access cover toward you (2).
4.
Remove the service access cover (3).
Battery on page
45).
Spare part number
652648-001
Component replacement procedures
47